User manual

Chapter 6 Tutorials
GS2210 Series User’s Guide
59
Figure 49 Tutorial: Enable Auto Configuration
3 Go to the Basic Setting > IP Setup screen. Select the checkbox in the DHCP Client field.
4 If you want to load the auto configuration file with DHCP option 60 enabled and a Vendor Class
Identifier assigned when you reboot the Switch, follow the instruction below. Otherwise, skip this step.
In the Basic Setting > IP Setup screen, select the checkbox in the Option-60 field, and enter a Vendor
Class Identifier in the Class-ID field. In this example, we use “ZyxelCorp”. Click Apply to save your
changes. See Section 8.6 on page 72 for more information.
Figure 50 Tutorial: Enable DHCP Client & Option 60
5 You need to save the current configuration in a configuration file, so the Switch will load the auto
configuration file from the TFTP server automatically when rebooting. Go to the Management >
Maintenance screen. Click the Config 1, Config2, or Custom Default button next to the Save
Configuration field. See Section 43.2.2 on page 356 for more information.