User manual

Chapter 8 Basic Setting
GS2210 Series User’s Guide
73
Figure 60 Basic Setting > IP Setup
The following table describes the labels in this screen.
Table 14 Basic Setting > IP Setup
LABEL DESCRIPTION
Default Management IP Address
DHCP Client Select this option if you have a DHCP server that can assign the Switch an IP address,
subnet mask, a default gateway IP address and a domain name server IP address
automatically.
Option-60 Select this and enter the device identity you want the Switch to add in the DHCP discovery
frames that go to the DHCP server.
Class-ID Enter the Vendor Class Identifier, such as the type of the hardware or firmware.
Static IP Address Select this option if you don’t have a DHCP server or if you wish to assign static IP address
information to the Switch. You need to fill in the following fields when you select this option.
IP Address Enter the IP address of your Switch in dotted decimal notation for example 192.168.1.1.
IP Subnet Mask Enter the IP subnet mask of your Switch in dotted decimal notation for example
255.255.255.0.
Default Gateway Enter the IP address of the default outgoing gateway in dotted decimal notation, for
example 192.168.1.254.
VID Enter the VLAN identification number associated with the Switch IP address. This is the VLAN
ID of the CPU and is used for management only. The default is "1". All ports, by default, are
fixed members of this "management VLAN" in order to manage the device from any port. If
a port is not a member of this VLAN, then users on that port cannot access the device. To
access the Switch make sure the port that you are connected to is a member of
Management VLAN.