User manual

Chapter 8 Basic Setting
GS2210 Series User’s Guide
79
8.8.2 PoE Setup
Use this screen to set the priority levels, power-up mode and schedule for the Switch in distributing power
to PDs.
Click the PoE Setup link in the Basic Setting > PoE Status screen. The following screen opens.
Figure 65 Basic Setting > PoE Setup
The following table describes the labels in this screen.
Time Range This field displays the name of the schedule which is applied to the port. PoE is enabled at the
specified time/date.
state This field displays whether the port can receive power from the Switch (In) or not (Out) currently.
It shows - if there is no schedule applied to the port.
Table 17 Basic Setting > PoE Setup > PoE Time Range Status (continued)
LABEL DESCRIPTION
Table 18 Basic Setting > PoE Setup
LABEL DESCRIPTION
PoE Mode Select the power management mode you want the Switch to use.
• Classification - Select this if you want the Switch to reserve the Max Power (mW) to each PD
according to the priority level. If the total power supply runs out, PDs with lower priority do not
get power to function.
• Consumption - Select this if you want the Switch to manage the total power supply so that
each connected PD gets a resource. However, the power allocated by the Switch may be
less than the Max Power (mW) of the PD. PDs with higher priority also get more power than
those with lower priority levels.
Port This is the port index number.