User's Manual

ISG50 User’s Guide 107
CHAPTER 7
General Tutorials
Here are examples of using the Web Configurator to configure general settings in the ISG50. See
Chapter 8 on page 135 for how to configure PBX settings.
Note: The tutorials featured here require a basic understanding of connecting to and using the Web
Configurator, see Chapter 3 on page 43 for details. For field descriptions of individual screens, see
Technical Reference on page 183.
7.1 How to Configure Interfaces, Port Roles, and Zones
This tutorial shows how to configure Ethernet interfaces, port roles, and zones for the following
example configuration (see Section 6.3.2 on page 93 for the default configuration).
• You want to be able to apply security settings specifically for all VPN tunnels so you add them to
the IPSec_VPN zone.
•The wan1 interface uses a static IP address of 1.2.3.4.
•Add P4 to the dmz interface. The dmz interface is used for a protected local network. It uses IP
address 192.168.3.1 and has a DHCP server.
Figure 71 Ethernet Interface, Port Roles, and Zone Configuration Example
ISG