User's Manual

Chapter 10 Monitor
ISG50 User’s Guide
196
•Use the PBX > BRI Trunk screen (Section 10.17 on page 218) to display status information
about external connections via BRI interfaces.
•Use the PBX > ACD Queue screen (Section 10.18 on page 219) to monitor phone call activity
for Automatic Call Distribution (ACD) agents.
•Use the System Log screen (Section 10.19 on page 220) to view the ISG50’s current log
messages. You can change the way the log is displayed, you can e-mail the log, and you can also
clear the log in this screen.
•Use the Call Recording screen (Section 10.20 on page 222) to search for call recordings on the
ISG50.
•Use the CDR screens (Section 10.21 on page 223 to Section 10.23 on page 227) to backup or
search for call records on the ISG50.
10.2 The Port Statistics Screen
Use this screen to look at packet statistics for each Gigabit Ethernet port. To access this screen,
click Monitor > System Status > Port Statistics.
Figure 142 Monitor > System Status > Port Statistics
The following table describes the labels in this screen.
Table 33 Monitor > System Status > Port Statistics
LABEL DESCRIPTION
Poll Interval Enter how often you want this window to be updated automatically, and click Set Interval.
Set Interval Click this to set the Poll Interval the screen uses.
Stop Click this to stop the window from updating automatically. You can start it again by setting
the Poll Interval and clicking Set Interval.
Switch to
Graphic View
Click this to display the port statistics as a line graph.
# This field displays the port’s number in the list.
Port This field displays the physical port number.