User's Manual

Chapter 10 Monitor
ISG50 User’s Guide
203
The following table displays the maximum number of records shown in the report, the byte count
limit, and the hit count limit.
10.5 The Session Monitor Screen
The Session Monitor screen displays information about active sessions for debugging or statistical
analysis. It is not possible to manage sessions in this screen. The following information is displayed.
• User who started the session
• Protocol or service port used
• Source address
• Destination address
• Number of bytes received (so far)
• Number of bytes transmitted (so far)
• Duration (so far)
You can look at all the active sessions by user, service, source IP address, or destination IP address.
You can also filter the information by user, protocol / service or service group, source address, and/
or destination address and view it by user.
Click Monitor > System Status > Session Monitor to display the following screen.
Figure 146 Monitor > System Status > Session Monitor
Table 37 Maximum Values for Reports
LABEL DESCRIPTION
Maximum Number of Records 20
Byte Count Limit 2
64
bytes; this is just less than 17 million terabytes.
Hit Count Limit 2
64
hits; this is over 1.8 x 10
19
hits.