User's Manual

Chapter 10 Monitor
ISG50 User’s Guide
209
10.9.1 More Information
This screen displays more information on your 3G, such as the signal strength, IMEA/ESN and IMSI
that helps identify your 3G device and SIM card. Click Monitor > System Status > More
Information to display this screen.
Note: This screen is only available when the 3G device is attached to and activated on the
ISG50.
Figure 151 Monitor > System Status > More Information
The following table describes the labels in this screen.
Table 43 Monitor > System Status > More Information
LABEL DESCRIPTION
Extension Slot This field displays where the entry’s cellular card is located.
Service Provider This displays the name of your network service provider. This shows Limited Service if
the service provider has stopped service to the 3G SIM card. For example if the bill has
not been paid or the account has expired.
Cellular System This field displays what type of cellular network the 3G connection is using. The network
type varies depending on the 3G card you inserted and could be UMTS, UMTS/HSDPA,
GPRS or EDGE when you insert a GSM 3G card, or 1xRTT, EVDO Rev.0 or EVDO Rev.A
when you insert a CDMA 3G card.
Signal Strength This is the Signal Quality measured in dBm.
Signal Quality This displays the strength of the signal. The signal strength mainly depends on the
antenna output power and the distance between your ISG50 and the service provider’s
base station.
Device
Manufacturer
This shows the name of the company that produced the 3G device.
Device Model This field displays the model name of the cellular card.