User's Manual

Chapter 10 Monitor
ISG50 User’s Guide
218
10.17 BRI Trunk Screen
This screen displays status information about external connections via BRI interfaces. Click
Monitor > PBX > BRI Trunk to display this screen.
Figure 159 Monitor > PBX > BRI Trunk
The following table describes the labels in this screen.
Table 51 Monitor > PBX > BRI Trunk
LABEL DESCRIPTION
General Settings Use this section to specify your query criteria. You can select an attribute, value pair for
your search. You can choose to query by:
• Direction - select which direction of calls you want to view status details about ISDN
BRI lines. Select In for incoming calls, Out for outgoing calls or all for both incoming
and outgoing calls. Alternatively, select N/A to display configured BRI trunk(s)
without any calls over it.
Click Query to update the status detail table in the BRI Trunk Summary section of the
screen.
Refresh interval
Enter how often (seconds) you want the ISG50 to update this screen. Click Apply to
update the screen immediately.
If you do not want this screen to update periodically, enter 0.
BRI Trunk
Summary
This section displays the status detail table.
# This field is a sequential value, and it is not associated with a specific entry.
Port
This field displays the port number of the ISDN BRI port.
Group Name This field displays the outbound line group name to which an ISDN BRI line is assigned.
Caller ID
This field displays the caller identifier of a call or N/A for configured BRI trunk(s) without
any calls over it.
Called Num.
This field displays the dialed number of a call or N/A for configured BRI trunk(s) without
any calls over it.
Direction
This field displays In for an incoming call, Out for an outgoing call, none for configured
BRI trunk(s) without any calls over it.