User's Manual

Chapter 22 Authentication Policy
ISG50 User’s Guide
350
22.2.1 Creating/Editing an Authentication Policy
Click Configuration > Auth. Policy and then the Add (or Edit) icon to open the Auth. Policy
Edit screen. Use this screen to configure an authentication policy.
Figure 232 Configuration > Auth. Policy > Add
Destination This displays the destination address object to which this policy applies.
Schedule This field displays the schedule object that dictates when the policy applies. none
means the policy is active at all times if enabled.
Authentication This field displays the authentication requirement for users when their traffic
matches this policy. This is n/a for the default policy.
unnecessary - Users do not need to be authenticated.
required - Users need to be authenticated. They must manually go to the login
screen. The ISG50 will not redirect them to the login screen.
force - Users need to be authenticated. The ISG50 automatically displays the
login screen whenever it routes HTTP traffic for users who have not logged in yet.
Description If the entry has a description configured, it displays here.
Apply Click this button to save your changes to the ISG50.
Reset Click this button to return the screen to its last-saved settings.
Table 111 Configuration > Auth. Policy (continued)
LABEL DESCRIPTION