User's Manual

Chapter 29 Extension Management
ISG50 User’s Guide
466
No Answer Forward Select Disable to turn this feature off for this extension.
Select Enable to forward all incoming calls to the extensions specified in the Find Me
List when this extension is not answered within the default ring time. Use the Add,
Edit, and Remove icons to create, modify, or delete Find Me List entries.
Select Voice Mail to forward calls directly to voice mail.
After Office Hours
These fields specify how to treat calls to your extension that occur after office hours.
Select Disable to turn this feature off for this extension.
Select Enable and specify an extension or other phone number 3-20 digits in length.
The ISG50 will forward all incoming calls to that extension.
Select Voice Mail to forward calls directly to voice mail.
Call Blocking
Use this section to configure call blocking settings for the extension.
Black List Select Disable to turn this feature off for this extension.
Select Enable and the ISG50 will block all incoming calls from extensions that you
specify as blacklisted. Use the Black List to configure phone numbers that you want to
block from calling you. Use the Add, Edit, and Remove icons to create, modify, or
delete entries.
Block the calls
without Caller ID
Select Enable and the ISG50 will block all incoming calls from phone that do not send
caller ID.
Mobile Extension
Use this section to configure your mobile extension settings.
Mobile
Extension
Select Manually to allow authority group members to turn this feature on and off using
feature codes.
Select Force Enable to override the authority group member settings and require all
calls to use this feature.
For more information on feature codes, see Section 27.3 on page 433.
Number
Enter the number to which you want the ISG50 to forward any incoming calls to your
extension.
Dial Rule
Select a dial rule to be applied to the mobile extension. Dial rules correspond to the
Least Cost Routing rules used in Configuration > PBX > Outbound Line
Management > LCR. For more information, see Chapter 32 on page 519.
Note: This option only works with digital outbound connections such as BRI. Analog
outbound connections such as FXO cannot use this option.
OK Click OK to save your customized settings and exit this screen.
Cancel Click Cancel to exit this screen without saving.
Table 156 Extension Add/Edit: Call Forward (continued)
LABEL DESCRIPTION