User's Manual

Chapter 40 Auto Provision
ISG50 User’s Guide
575
40.2 Auto Provision Setup
Use this screen to screens to configure auto provisioning for the snom VoIP devices connected to
the ISG50. This screen displays the mapping between SIP extensions and snom VoIP device’s MAC
addresses. To access this screen, click Configuration > PBX > Auto Provision.
Figure 386 Configuration > PBX > Auto Provision
Each field is described in the following table.
Table 219 Configuration > PBX > Auto Provision
LABEL DESCRIPTION
Enable Auto
Provision
Select this to turn on auto provisioning or clear it to turn it off.
Batch XML
Settings
With the snom auto provision service enabled and at least one SIP extension
configured, you can click Download to download a single XML configuration file.
After you’ve downloaded the XML batch configuration file, you can edit it and use
Browse and Upload to copy it to the ISG50.
Current SIP Peer
Summary
Use this list to manage configuration files for the local snom VoIP devices.
Edit
Select an entry for an extension using a snom VoIP device and click the Edit icon
to create a configuration file for it.
Remove Config
Select a snom VoIP device extension and click the Remove Config icon to
remove its configuration profile.