User's Manual

Chapter 40 Auto Provision
ISG50 User’s Guide
577
40.2.2 Auto Provision Edit
Use this screen to set up the auto provisioning settings for a snom extension on the ISG50. To
access this screen, click Configuration > PBX > Auto Provision and then click the Edit button
for a snom device’s extension.
Figure 387 Configuration > PBX > Auto Provision > Edit
Each field is described in the following table.
Table 220 Configuration > PBX > Auto Provision > Edit
LABEL DESCRIPTION
MAC Address Specify the MAC address of the snom device that receives configuration settings
from the ISG50 for this extension.
Active
Select how to apply auto provisioning to this extension.
• Update automatically - Automatically update this extension’s firmware
and/or configuration whenever an update of is available.
• Ask for update - Update this extension’s firmware and/or configuration
whenever it checks for an update.
• Never update, load settings only - Do not update this extension’s
firmware, only update its configuration.
• Never update, do not load settings - Do not update this extension’s
firmware, and do not update its configuration.
Product
Select the snom VOIP product to be targeted by this auto provision profile. This
ensures greater compatibility between it and the ISG50.
OK Click OK to save your customized settings and exit this screen.
Cancel Click Cancel to exit this screen without saving.