User's Manual

Chapter 44 User/Group
ISG50 User’s Guide
605
44.3.1 Group Add/Edit Screen
The Group Add/Edit screen allows you to create a new user group or edit an existing one. To
access this screen, go to the Group screen (see Section 44.3 on page 604), and click either the
Add icon or an Edit icon.
Figure 403 Configuration > User/Group > Group > Add
The following table describes the labels in this screen.
44.4 Setting Screen
The Setting screen controls default settings, login settings, lockout settings, and other user
settings for the ISG50. You can also use this screen to specify when users must log in to the ISG50
before it routes traffic for them.
Table 233 Configuration > User/Group > Group > Add
LABEL DESCRIPTION
Name Type the name for this user group. You may use 1-31 alphanumeric characters,
underscores(
_), or dashes (-), but the first character cannot be a number. This
value is case-sensitive. User group names have to be different than user names.
Description Enter the description of the user group, if any. You can use up to 60 characters,
punctuation marks, and spaces.
Member List The Member list displays the names of the users and user groups that have been
added to the user group. The order of members is not important. Select users and
groups from the Available list that you want to be members of this group and
move them to the Member list. You can double-click a single entry to move it or
use the [Shift] or [Ctrl] key to select multiple entries and use the arrow button to
move them.
Move any members you do not want included to the Available list.
OK Click OK to save your changes back to the ISG50.
Cancel Click Cancel to exit this screen without saving your changes.