User's Manual

Chapter 45 Addresses
ISG50 User’s Guide
616
The following table describes the labels in this screen. See Section 45.3.1 on page 616 for more
information as well.
45.3.1 Address Group Add/Edit Screen
The Address Group Add/Edit screen allows you to create a new address group or edit an existing
one. To access this screen, go to the Address Group screen (see Section 45.3 on page 615), and
click either the Add icon or an Edit icon.
Figure 412 Configuration > Object > Address > Address Group > Add
The following table describes the labels in this screen.
Table 240 Configuration > Object > Address > Address Group
LABEL DESCRIPTION
Add Click this to create a new entry.
Edit Double-click an entry or select it and click Edit to be able to modify the entry’s
settings.
Remove To remove an entry, select it and click Remove. The ISG50 confirms you want to
remove it before doing so.
Object
References
Select an entry and click Object References to open a screen that shows which
settings use the entry. See Section 12.3.2 on page 246 for an example.
# This field is a sequential value, and it is not associated with a specific address
group.
Name This field displays the name of each address group.
Description This field displays the description of each address group, if any.
Table 241 Configuration > Object > Address > Address Group > Add
LABEL DESCRIPTION
Name Enter a name for the address group. You may use 1-31 alphanumeric characters,
underscores(
_), or dashes (-), but the first character cannot be a number. This
value is case-sensitive.
Description This field displays the description of each address group, if any. You can use up to
60 characters, punctuation marks, and spaces.