User's Manual

Chapter 56 Diagnostics
ISG50 User’s Guide
739
56.3 The Packet Capture Screen
Use this screen to capture network traffic going through the ISG50’s interfaces. Studying these
packet captures may help you identify network problems. Click Maintenance > Diagnostics >
Packet Capture to open the packet capture screen.
Note: New capture files overwrite existing files of the same name. Change the File Suffix
field’s setting to avoid this.
Figure 502 Maintenance > Diagnostics > Packet Capture
The following table describes the labels in this screen.
Table 296 Maintenance > Diagnostics > Packet Capture
LABEL DESCRIPTION
Interfaces Enabled interfaces (except for virtual interfaces) appear under Available
Interfaces. Select interfaces for which to capture packets and click the
right arrow button to move them to the Capture Interfaces list. Use the
[Shift] and/or [Ctrl] key to select multiple objects.
IP Type Select the protocol of traffic for which to capture packets. Select any to
capture packets for all types of traffic.
Host IP Select a host IP address object for which to capture packets. Select any to
capture packets for all hosts. Select User Defined to be able to enter an IP
address.