User's Manual

Appendix A Log Descriptions
ISG50 User’s Guide
802
Interface %s alive,
related policy route
rules will be re-
enabled
An interface came back up so the ISG50 will use the related policy
route rules again.
Interface %s dead,
related policy route
rules will be disabled
An interface went down so the ISG50 will stop using the related
policy route rules.
Trunk %s alive,
related policy route
rules will be re-
enabled
A trunk came back up so the ISG50 will use the related policy route
rules again.
Trunk %s dead, related
policy route rules
will be disabled
A trunk went down so the ISG50 will stop using the related policy
route rules.
Table 325 Built-in Services Logs
LOG MESSAGE DESCRIPTION
User on %u.%u.%u.%u
has been denied access
from %s
HTTP/HTTPS/TELNET/SSH/FTP/SNMP access to the device was
denied.
%u.%u.%u.%u is IP address
%s is HTTP/HTTPS/SSH/SNMP/FTP/TELNET
HTTPS certificate:%s
does not exist. HTTPS
service will not work.
An administrator assigned a nonexistent certificate to HTTPS.
%s is certificate name assigned by user
HTTPS port has been
changed to port %s.
An administrator changed the port number for HTTPS.
%s is port number
HTTPS port has been
changed to default
port.
An administrator changed the port number for HTTPS back to the
default (443).
HTTP port has changed
to port %s.
An administrator changed the port number for HTTP.
%s is port number assigned by user
HTTP port has changed
to default port.
An administrator changed the port number for HTTP back to the
default (80).
SSH port has been
changed to port %s.
An administrator changed the port number for SSH.
%s is port number assigned by user
SSH port has been
changed to default
port.
An administrator changed the port number for SSH back to the
default (22).
SSH certificate:%s
does not exist. SSH
service will not work.
An administrator assigned a nonexistent certificate to SSH.
%s is certificate name assigned by user
SSH certificate:%s
format is wrong. SSH
service will not work.
After an administrator assigns a certificate for SSH, the device needs
to convert it to a key used for SSH.
%s is certificate name assigned by user
Table 324 Policy Route Logs (continued)
LOG MESSAGE DESCRIPTION