User's Manual

Appendix A Log Descriptions
ISG50 User’s Guide
806
DHCP Server executed
with cautious mode
enabled
DHCP Server executed with cautious mode enabled.
DHCP Server executed
with cautious mode
disabled
DHCP Server executed with cautious mode disabled.
Received packet is not
an ARP response packet
A packet was received but it is not an ARP response packet.
Receive an ARP
response
The device received an ARP response.
Receive ARP response
from %s (%s)
The device received an ARP response from the listed source.
The request IP is: %s,
sent from %s
The device accepted a request.
Received ARP response
NOT for the request IP
address
The device received an ARP response that is NOT for the requested IP
address.
Receive an ARP
response from the
client issuing the
DHCP request
The device received an ARP response from the client issuing the
DHCP request.
Receive an ARP
response from an
unknown client
The device received an ARP response from an unknown client.
In total, received %d
arp response packets
for the requested IP
address
The device received the specified total number of ARP response
packets for the requested IP address.
Clear arp cache
successfully.
The ARP cache was cleared successfully.
Client MAC address is
not an Ethernet
address
A client MAC address is not an Ethernet address.
DHCP request received
via interface
%s (%s:%s), src_mac:
%s with requested IP:
%s
The device received a DHCP request through the specified interface.
IP confliction is
detected. Send back
DHCP-NAK.
IP conflict was detected. Send back DHCP-NAK.
Clear ARP cache done
Clear ARP cache done.
Set manual time has
succeeded. Current
time is %s
The device date and time was changed manually.
%s is the date and time.
NTP update successful,
current time is %s
The device successfully synchronized with a NTP time server .
%s is the date and time.
Table 326 System Logs (continued)
LOG MESSAGE DESCRIPTION