User Manual
Table Of Contents
- LTE3301 Series
- User’s Guide
- Technical Reference
- Monitor
- WAN
- Wireless LAN
- LAN
- DHCP Server
- NAT
- DDNS
- Routing
- Interface Group
- Firewall
- Content Filtering
- IPv6 Firewall
- Bandwidth Management
- Universal Plug-and-Play (UPnP)
- TR-069
- Maintenance
- Troubleshooting
- Pop-up Windows, JavaScript and Java Permissions
- Setting Up Your Computer’s IP Address
- Common Services
- Customer Support
- Legal Information
- Index
Chapter 7 Wireless LAN
LTE3301 Series User’s Guide
66
Note: If you do not enable any wireless security on your LTE3301, your network is accessible to
any wireless networking device that is within range.
Fig ure 35 Network > Wireless LAN > General: No Security
The following table describes the labels in this screen.
7.3.2 WEP Enc ryptio n
WEP encryption scrambles the data transmitted between the wireless stations and the access points to
keep network communications private. It encrypts unicast and multicast communications in a network.
Both the wireless stations and the access points must use the same WEP key.
Your LTE3301 allows you to configure up to four 64-bit or 128-bit WEP keys but only one key can be
enabled at any one time.
Select Sta tic WEP from the Se c urity Mo d e list.
Table 19 Network > Wireless LAN > General: No Security
LABEL DESC RIPTIO N
Security Mode Choose No Se c urity from the drop-down list box.
Apply Click A pply to save your changes back to the LTE3301.
Cancel Click Ca nc e l to reload the previous configuration for this screen.










