Manualshelf

User's Manual

ManualsBrandsZyXEL ManualsNetworkingLTE6100
41424344454647484950
Chapter 5 Home Networking
LTE6100 User’s Guide
44
Use the following screen to configure the UPnP settings on your LTE Device. Click Network Setting
> Home Networking > Static DHCP > UPnP to display the screen shown next.
Figure 20 Network Setting > Home Networking > UPnP
The following table describes the labels in this screen.
Table 12 Network Settings > Home Networking > UPnP
LABEL DESCRIPTION
UPnP Select Enable to activate UPnP. Be aware that anyone could use a UPnP application to open
the web configurator's login screen without entering the LTE Device's IP address (although
you must still enter the password to access the web configurator).
Apply Click Apply to save your changes.