User's Manual

Chapter 7 Quality of Service (QoS)
LTE6100 User’s Guide
56
7.5 The QoS Monitor Screen
To view the LTE Device’s QoS packet statistics, click Network Setting > QoS > Monitor. The
screen appears as shown.
Figure 29 Network Setting > QoS > Monitor
Port Range If you select TCP or UDP in the IP Protocol field, select the check box and enter the port
number(s) of the source.
Exclude Select this option to exclude the packets that match the specified criteria from this
classifier.
Others
IP Protocol This field is available only when you select IP in the Ether Type field.
Select this option and select the protocol (service type) from TCP or UDP. If you select
User defined, enter the protocol (service type) number.
IP Packet
Length
This field is available only when you select IP in the Ether Type field.
Select this option and enter the minimum and maximum packet length (from 46 to 1504) in
the fields provided.
DSCP This field is available only when you select IP in the Ether Type field.
Select this option and specify a DSCP (DiffServ Code Point) number between 0 and 63 in
the field provided.
Exclude Select this option to exclude the packets that match the specified criteria from this
classifier.
Apply Click Apply to save your changes.
Back Click Back to return to the previous screen without saving.
Table 19 Class Setup: Add/Edit (continued)
LABEL DESCRIPTION