User's Manual

Chapter 9 Dynamic DNS
LTE6100 User’s Guide
68
9.2 The Dynamic DNS Screen
Use the Dynamic DNS screen to enable DDNS and configure the DDNS settings on the LTE Device.
To change your LTE Device’s DDNS, click Network Setting > Dynamic DNS. The screen appears
as shown.
Figure 36 Network Setting > Dynamic DNS
The following table describes the fields in this screen.
Table 26 Network Setting > DNS
LABEL DESCRIPTION
Dynamic DNS Configuration
Active Dynamic
DNS
Select this check box to use dynamic DNS.
Service Provider Select the name of your Dynamic DNS service provider.
Dynamic DNS
Type
Select the type of service that you are registered for from your Dynamic DNS service
provider.
Host Name Type the domain name assigned to your LTE Device by your Dynamic DNS provider.
You can specify up to two host names in the field separated by a comma (",").
User Name Type your user name.
Password Type the password assigned to you.
Apply Click Apply to save your changes.
Cancel Click Cancel to restore your previously saved settings.