Operation Manual

Chapter 5 Home Networking
LTE7410 User’s Guide
41
LAN IPv6 Address
Assign Setup
Select how you want to obtain an IPv6 address:
• Stateless: The LTE Device uses IPv6 stateless autoconfiguration. RADVD (Router
Advertisement Daemon) is enabled to have the LTE Device send IPv6 prefix
information in router advertisements periodically and in response to router
solicitations. DHCPv6 server is disabled.
• Stateful: The LTE Device uses IPv6 stateful autoconfiguration. The DHCPv6 server
is enabled to have the LTE Device act as a DHCPv6 server and pass IPv6 addresses
to DHCPv6 clients.
• Stateless and Stateful: The LTE Device uses both IPv6 stateless and stateful
autoconfiguration. The LAN IPv6 clients can obtain IPv6 addresses either through
router advertisements or through DHCPv6.
LAN IPv6 DNS Assign
Setup
Select how the LTE Device provide DNS server and domain name information to the
clients:
• Stateless: The LTE Device uses IPv6 stateless autoconfiguration. RADVD (Router
Advertisement Daemon) is enabled to have the LTE Device send IPv6 prefix
information in router advertisements periodically and in response to router
solicitations. DHCPv6 server is disabled.
• Stateful: The LTE Device uses IPv6 stateful autoconfiguration. The DHCPv6 server
is enabled to have the LTE Device act as a DHCPv6 server and pass IPv6 addresses
to DHCPv6 clients.
• Stateless and Stateful: The LTE Device uses both IPv6 stateless and stateful
autoconfiguration. The LAN IPv6 clients can obtain IPv6 addresses either through
router advertisements or through DHCPv6.
DHCPv6
DHCPv6 Server Use this field to Enable or Disable DHCPv6 server on the LTE Device.
DNSv6 Mode Select the DNS role (Proxy or Relay) that you want the LTE Device to act in the IPv6
LAN network. Alternatively, select Manual and specify IPv6 addresses of the DNS
servers in the fields below.
Primary DNS This field is available if you choose Manual as the DNSv6 mode. Enter the first DNS
server IPv6 address the LTE Device passes to the DHCP clients.
Secondary DNS This field is available if you choose Manual as the DNSv6 mode. Enter the second DNS
server IPv6 address the LTE Device passes to the DHCP clients.
Information refresh
time
Enter the number of seconds a DHCPv6 client should wait before refreshing
information retrieved from DHCPv6.
Advanced Setup Click this to open the IPv6 LAN Setup Advanced Setup section.
RADVD Setup
Send RA on Select this to have the LTE Device send router advertisement messages to the LAN
hosts.
Router advertisement is a response to a router solicitation or a periodical multicast
advertisement from a router to advertise its presence and other parameters, such as
IPv6 prefix and DNS information.
Router solicitation is a request from a host to locate a router that can act as the
default router and forward packets.
Note: The LAN hosts neither generate global IPv6 addresses nor communicate with
other networks if you disable this feature.
Delegate M/O flag
from WAN
Select this to have the LTE Device obtain the M/O (Managed/Other) flag setting from
the service provider or uplink router.
Manual Select this to specify the M/O flag setting manually.
Managed config
flag on
Select this to have the LTE Device indicate to hosts to obtain network settings (such as
prefix and DNS settings) through DHCPv6.
Clear this to have the LTE Device indicate to hosts that DHCPv6 is not available and
they should use the prefix in the router advertisement message.
Table 7 Network Setting > Home Networking > IPv6 LAN Setup (continued)
LABEL DESCRIPTION