Operation Manual

Chapter 5 Home Networking
LTE7410 User’s Guide
44
5.5 The UPnP Screen
Universal Plug and Play (UPnP) is a distributed, open networking standard that uses TCP/IP for
simple peer-to-peer network connectivity between devices. A UPnP device can dynamically join a
network, obtain an IP address, convey its capabilities and learn about other devices on the network.
In turn, a device can leave a network smoothly and automatically when it is no longer in use.
See page 46 for more information on UPnP.
Use the following screen to configure the UPnP settings on your LTE Device. Click Network Setting
> Home Networking > Static DHCP > UPnP to display the screen shown next.
Figure 19 Network Setting > Home Networking > UPnP
The following table describes the labels in this screen.
5.6 Technical Reference
This section provides some technical background information about the topics covered in this
chapter.
OK Click Apply to save your changes.
Cancel Click Cancel to exit this screen without saving.
Table 9 Static DHCP: Add New Static Lease
LABEL DESCRIPTION
Table 10 Network Settings > Home Networking > UPnP
LABEL DESCRIPTION
UPnP Select Enable to activate UPnP. Be aware that anyone could use a UPnP application to
open the web configurator's login screen without entering the LTE Device's IP address
(although you must still enter the password to access the web configurator).
Apply Click Apply to save your changes.
Cancel Click this to restore your previously saved settings.