User's Guide

Chapter 14 Certificates
LTE Series User’s Guide
141
Figure 103 Create Certificate Request
The following table describes the labels in this screen.
14.2.2 View Certificate Request
Use this screen to view in-depth information about the certificate request. The Certificate is used to verify
the authenticity of the certification authority. The Private Key serves as your digital signature for
authentication and must be safely stored. The Signing Request contains the certificate signing request
value that you will copy upon submitting the certificate request to the CA (certificate authority).
Click the View icon in the Local Certificates screen to open the following screen.
Table 53 Create Certificate Request
LABEL DESCRIPTION
Certificate
Name
Type up to 63 ASCII characters (not including spaces) to identify this certificate.
Common Name Select Auto to have the Zyxel Device configure this field automatically. Or select Customize to
enter it manually.
Type the IP address (in dotted decimal notation), domain name or email address in the field
provided. The domain name or email address can be up to 63 ASCII characters. The domain
name or email address is for identification purposes only and can be any string.
Organization
Name
Type up to 63 characters to identify the company or group to which the certificate owner
belongs. You may use any character, including spaces, but the Zyxel Device drops trailing
spaces.
State/Province
Name
Type up to 32 characters to identify the state or province where the certificate owner is located.
You may use any character, including spaces, but the Zyxel Device drops trailing spaces.
Country/Region
Name
Select a country to identify the nation where the certificate owner is located.
Cancel Click Cancel to exit this screen without saving.
OK Click OK to save your changes.