User's Guide
Table Of Contents
- LTE Series
- User’s Guide
- Introduction
- The Web Configurator
- Quick Start
- Tutorials
- 4.1 Overview
- 4.2 Set Up a Wireless Network Using WPS
- 4.3 Connect to the Zyxel Device’s WiFi Network
- 4.4 Configure a Firewall Rule
- 4.5 Configure MAC Filter
- 4.6 Upgrade Firmware on the Zyxel Device
- 4.7 Back up a Configuration File
- 4.8 Restore Configuration
- 4.9 Configure DHCP
- 4.10 Configure Static Route for Routing to Another Network
- 4.11 Access the Zyxel Device Using DDNS
- Technical Reference
- Connection Status
- Broadband
- Home Networking
- Routing
- Network Address Translation (NAT)
- Dynamic DNS Setup
- Firewall
- MAC Filter
- Certificates
- Log
- Traffic Status
- ARP Table
- Routing Table
- Cellular WAN Status
- System
- User Account
- Remote Management
- Time Settings
- E-mail Notification
- Log Setting
- Firmware Upgrade
- Backup/Restore
- Diagnostic
- Troubleshooting
- Appendices
Chapter 23 Time Settings
LTE Series User’s Guide
174
Figure 127 Maintenance > Time
The following table describes the fields in this screen.
Table 75 Maintenance > Time
LABEL DESCRIPTION
Current Date/Time
Current Time This displays the time of your Zyxel Device.
Each time you reload this screen, the Zyxel Device synchronizes the time with the time server.
Current Date This displays the date of your Zyxel Device.
Each time you reload this screen, the Zyxel Device synchronizes the date with the time server.
Time and Date Setup
Time Protocol This displays the time protocol used by your Zyxel Device.