User's Guide

Chapter 25 Log Setting
LTE Series User’s Guide
181
Syslog Server Enter the server name or IP address of the syslog server that will log the selected categories of
logs.
UDP Port Enter the port number used by the syslog server.
E-mail Log Settings
E-mail Log
Setting
Click the switch (it will turn blue) to allow the sending via e-mail the system and security logs to
the e-mail address specified in Send Log to.
Note: Make sure that the Mail Server Address field is not left blank in the
Maintenance > E-mail Notifications screen.
Mail Account Select a server specified in Maintenance > E-mail Notifications to send the logs to.
System Log Mail
Subject
This field allows you to enter a descriptive name for the system log e-mail (for example Zyxel
System Log). Up to 127 characters are allowed for the System Log Mail Subject including special
characters inside the square brackets [!#%()*+,-./:=?@[]\{}~].
Security Log Mail
Subject
This field allows you to enter a descriptive name for the security log e-mail (for example Zyxel
Security Log). Up to 127 characters are allowed for the Security Log Mail Subject including
special characters inside the square brackets [!#%()*+,-./:=?@[]\{}~].
Send Log to This field allows you to enter the log’s designated e-mail recipient. The log’s format is plain text
file sent as an e-mail attachment.
Send Alarm to This field allows you to enter the alarm’s designated e-mail recipient. The alarm’s format is plain
text file sent as an e-mail attachment.
Alarm Interval Select the frequency of showing of the alarm.
Active Log
System Log Select the categories of System Logs that you want to record.
Security Log Select the categories of Security Logs that you want to record.
Apply Click Apply to save your changes.
Cancel Click Cancel to restore your previously saved settings.
Table 78 Maintenance > Log Setting (continued)
LABEL DESCRIPTION