User's Guide
Table Of Contents
- LTE Series
- User’s Guide
- Introduction
- The Web Configurator
- Quick Start
- Tutorials
- 4.1 Overview
- 4.2 Set Up a Wireless Network Using WPS
- 4.3 Connect to the Zyxel Device’s WiFi Network
- 4.4 Configure a Firewall Rule
- 4.5 Configure MAC Filter
- 4.6 Upgrade Firmware on the Zyxel Device
- 4.7 Back up a Configuration File
- 4.8 Restore Configuration
- 4.9 Configure DHCP
- 4.10 Configure Static Route for Routing to Another Network
- 4.11 Access the Zyxel Device Using DDNS
- Technical Reference
- Connection Status
- Broadband
- Home Networking
- Routing
- Network Address Translation (NAT)
- Dynamic DNS Setup
- Firewall
- MAC Filter
- Certificates
- Log
- Traffic Status
- ARP Table
- Routing Table
- Cellular WAN Status
- System
- User Account
- Remote Management
- Time Settings
- E-mail Notification
- Log Setting
- Firmware Upgrade
- Backup/Restore
- Diagnostic
- Troubleshooting
- Appendices
Chapter 2 The Web Configurator
LTE Series User’s Guide
26
MAC Filter MAC Filter Use this screen to block or allow traffic from devices of certain MAC
addresses to the Zyxel Device.
Certificates Local Certificates Use this screen to view a summary list of certificates and manage
certificates and certification requests.
Trusted CA
Use this screen to view and manage the list of the trusted CAs.
System Monitor
Log System Log Use this screen to view the status of events that occurred to the Zyxel
Device. You can export or email the logs.
Security Log Use this screen to view all security related events. You can select the
level and category of the security events in their proper drop-down list
window.
Levels include:
•Emergency
•Alert
• Critical
• Error
• Warning
•Notice
• Informational
•Debugging
Categories include:
• Account
• Attack
•Firewall
• MAC Filter
Traffic Status WAN Use this screen to view the status of all network traffic going through the
WAN port of the Zyxel Device.
LAN Use this screen to view the status of all network traffic going through the
LAN ports of the Zyxel Device.
ARP table ARP table Use this screen to view the ARP table. It displays the IP and MAC address
of each DHCP connection.
Routing Table Routing Table Use this screen to view the routing table on the Zyxel Device.
Cellular WAN
Status
Cellular Statistics Use this screen to look at the cellular Internet connection status.
Maintenance
System System
Use this screen to set the Zyxel Device name and Domain name.
User Account User Account Use this screen to change the user password on the Zyxel Device.
Remote
Management
MGMT Services Use this screen to enable specific traffic directions for network services.
MGMT Services
for IP Passthrough
Use this screen to enable various approaches to access this Zyxel Device
remotely from a WAN and/or LAN connection.
Trust Domain Use this screen to view a list of public IP addresses which are allowed to
access the Zyxel Device through the services configured in the
Maintenance > Remote Management screen.
Trust Domain for
IP Passthrough
Use this screen to enable public IP addresses to access this Zyxel Device
remotely from a WAN and/or LAN connection.
Time Time Use this screen to change your Zyxel Device’s time and date.
Email
Notification
Email Notification Use this screen to configure up to two mail servers and sender addresses
on the Zyxel Device.
Table 6 Navigation Panel Summary (continued)
LINK TAB FUNCTION