User's Guide

Chapter 4 Tutorials
LTE Series User’s Guide
46
through a DHCP Ack (Acknowledge) message that the host can use the IP address for the previously
specified lease time.
To configure the DHCP in your Zyxel Device:
1 Log into the Zyxel Device’s Web Configurator.
2 Click Network Setting > Home Networking > LAN Setup.
3 Select Enable DHCP Server State.
4 Enter a range of addresses from which your DHCP will assign to devices in your network.
Note: Do not include the Zyxel Device’s LAN IP address in your range of addresses.
5 Type the DHCP Server Lease Time, the period of time (in minutes) a device can use one of the IP
addresses from the DHCP pool. The lease time helps recycle unused IP addresses so that other can use
them again. Click Apply.
4.9.1 Add Devices to Your Static DHCP List
IP addresses from the DHCP pool can be reused after they have completed their lease time. Add your
devices to your Static DHCP List so they have the same IP address everytime they connect to your
network.
To add a device to your Static DHCP List:
1 Log into the Zyxel Device’s Web Configurator.
2 Go to Network Setting > Home Networking > Static DHCP screen.
3 Click Static DHCP Configuration in the Static DHCP Configuration screen.
4 Select Active and type the IP address you want to assign to your device.
5 Type the MAC Address of your device to which the LTE7460 assigns the IP address and click OK.