User's Guide

Chapter 7 Home Networking
LTE Series User’s Guide
82
The following table describes the labels in this screen.
If you click Static DHCP Configuration in the Static DHCP screen, the following screen displays.
Figure 51 Static DHCP: Static DHCP Configuration
The following table describes the labels in this screen.
Table 23 Network Setting > Home Networking > Static DHCP
LABEL DESCRIPTION
Static DHCP
Configuration
Click this to configure a static DHCP entry.
# This is the index number of the entry.
Status Active
MAC Address The MAC (Media Access Control) or Ethernet address on a LAN (Local Area Network) is
unique to your computer (six pairs of hexadecimal notation).
A network interface card such as an Ethernet adapter has a hardwired address that is
assigned at the factory. This address follows an industry standard that ensures no other
adapter has a similar address.
IP Address This field displays the IP address relative to the # field listed above.
Modify Click the Edit icon to configure the connection.
Click the Delete icon to remove the connection.
Table 24 Static DHCP: Configuration
LABEL DESCRIPTION
Active Select Enable to activate static DHCP in your Zyxel Device.
Group Name This displays the Group Name, usually Default.
IP Type The IP Type is normally IPv4 (non-configurable).
Select Device Info Select between Manual Input which allows you to enter the next two fields (MAC Address
and IP Address); or selecting an existing device would show its MAC address and IP address.
MAC Address Enter the MAC address of a computer on your LAN if you select Manual Input in the previous
field.
IP Address Enter the IP address that you want to assign to the computer on your LAN with the MAC
address that you will also specify if you select Manual Input in the previous field.
OK Click OK to save your changes.
Cancel Click Cancel to exit this screen without saving.