User's Manual

Chapter 8 Security
WiMAX Device Configuration User’s Guide
133
8.8 L2TP VPN Server
Use this screen to configure settings for Layer 2 Tunneling Protocol (L2TP) server.
Click Security > L2TP VPN > L2TP Server to open this screen as shown next.
Figure 74 L2TP Server
This screen contains the following fields:
Get IP
automatically
Select Yes to have the PPTP server assign a local IP address to the client.
Assign IP Address Enter the IP address for the client. Ensure that the IP address is configured to be
allowed on the PPTP server.
Idle Timeout Enter the time in minutes to timeout PPTP connections.
Table 55 PPTP Client: Add (continued)
LABEL DESCRIPTION
Table 56 L2TP Server
LABEL DESCRIPTION
L2TP Server
Enable Use this field to turn the WiMAX Device’S L2TP VPN function on or off.
Server Name Enter the server name for the L2TP VPN connection.