User's Manual

115
One session Up
t
ofiveaccoun
t
s No limi
t
MSAP2000 AAMS User’s Guide
C HAPTER 18
Access Control
This chapter describes how to configure access control.
18.1 About Access Control
Click Advanced Application and then Access Control from the navigation
panel to display the screen as shown. From this screen you can configure SNMP
and enable/disable remote service access.
Figure 54 Access Control
18.2 Access Control Overview
A console port session and a Telnet session cannot coexist. The console port
has higher priority. If you telnet to the MSAP2000 AAMS and someone is
already logged in from the console port, then you will see the following
message.
Figure 55 Console Port Priority
"Local administrator is configuring this device now!!! Connection to
host lost."
A console port or Telnet session can coexist with one FTP session, a web
configurator session and/or limitless SNMP access control sessions.
Table 42 Access Control Overview
CONSOLE PORT TELNET FTP WEB SNMP
The console port and Telnet share one
session. The Console port has the highest
priority and Telnet has the lowest priority.