User's Manual

185
MSAP2000 AAMS User’s Guide
This command displays which alarm profiles the MSAP2000 AAMS is set to use for
specific (or all) ADSL
ports.
The following example displays which alarm profile the MSAP2000 AAMS is set to
use for ADSL port 5.
Figure 104 Alarm Profile Showmap Command Example
ras> adsl alarmprofile showmap 5
ADSL alarm profile mapping:
Port 5: Alarm Profile = DEFVAL
26.4 Virtual Channel Profile Commands
Use the following commands to configure virtual channel profiles.
26.4.1 Show Virtual Channel Profile Command
Syntax:
adsl vcprofile show [vcprofile]
where
[vcprofile]
= The name of the virtual channel profile (up to 31 ASCII
charac
ters).
Displays the settings of the specified virtual channel profile (or all of them if
you do not specify one).
26.4.2 Set Virtual Channel Profile Command
Syntax:
adsl vcprofile set <vcprofile> <vc|llc> <ubr|cbr> <pcr> <cdvt>
or
adsl vcprofile set <vcprofile> <vc|llc> <vbr(rt-vbr)|nrt-vbr> <pcr> <cdvt>
<scr> <bt>