User's Manual

217
MSAP2000 AAMS User’s Guide
[eapol]
Reject EAPol packets. EAP (Extensible
Authentication Protocol, RFC 2486) over LAN. EAP is
used with IEEE 802.1x to allow additional authentication
methods (besides RADIUS) to be deployed with no
changes to the access point or the wireless clients.
[igmp] Reject IGMP packets. Internet Group Multicast
Protocol is used when sending packets to a specific group
of hosts.
[none] Accept all
packets.
This command sets the packet type filter for the specified ADSL port(s).
The following example sets ADSL port 9 to reject ARP, PPPoE and IGMP packets.
Figure 136 Packet Filter Set Command Example
ras> switch pktfilter set 9 arp pppoe igmp