User's Manual

221
MSAP2000 AAMS User’s Guide
28.4 General IP Commands
The following shows general IP commands that help with the management of the
IP
parameters.
28.4.1 Show Command
Syntax:
ras> ip show
Use the command to display the current management IP settings.
28.4.2 Ping Command
Syntax:
ras> ip ping <ip> [count]
where
<ip>
= The IP address of the target.
[count] = The number of pings you want the MSAP2000 AAMS to send
This is an IP facility to check for network functionality by sending an echo request
to another
IP host and waiting for the reply.
28.4.3 Route Set Command
Syntax:
ras> ip route set <dst ip>[/netmask] <gateway ip> [metric] <name>