User's Manual

225
MSAP2000 AAMS User’s Guide
Table 63 Statistics Commands (continued)
COMMAND DESCRIPTION
ip Displays a management port’s
status and performance data.
showall [nopause] Displays all statistics configuration.
29.2 Statistics Monitor Command
Syntax:
ras> statistics monitor
This command shows the current hardware status (voltage, temperature, fan
speed and alarm status).
An example is shown next.
Figure 140 Statistics Monitor Command Example
ras> statistics monitor
Hardware monitor status: enabled
nominal limit(hi) limit(lo) current min max avg status
------- --------- --------- --------- -------- -------- -------- ---- v1(v) 1.200 1.344 1.056
1.165 1.152 1.165 1.155 Normal v2(v) 1.800 1.944 1.656 1.806 1.806
1.806 1.806 Normal v3(v) 3.300 3.564 3.036 3.200 3.200 3.257
3.200 Normal v4(v) 18.000 19.440 16.560 18.175 18.175 19.028
18.175
Normal
limit(hi) limit(lo) current min max avg status
--------- --------- --------- --------- --------- --------- -------- t1(c) 97.000 -55.000
33.000 28.000 33.000 30.000 Normal t2(c) 97.000 -55.000 39.000
29.000 39.000 36.000 Normal t3(c) 97.000 -55.000 38.000 30.000 38.000
35.000 Normal
ras>
29.3 Statistics Port Command
Syntax:
ras> statistics port <portlist> [<vpi> <vci>] [clear]