Operation Manual

Chapter 1 Introduction
NBG-418N v2 User’s Guide
13
1.3 LEDs
Figure 2 Front Panel
The following table describes the LEDs and the WPS button.
1.4 The WPS/RESET Button
Your NBG-418N v2 supports WiFi Protected Setup (WPS), which is an easy way to set up a secure
wireless network. WPS is an industry standard specification, defined by the Wi-Fi Alliance.
Table 1 Front Panel LEDs and WPS Button
LED COLOR STATUS DESCRIPTION
POWER Green On The NBG-418N v2 is receiving power and functioning properly.
Off The NBG-418N v2 is not receiving power.
WAN Green On The NBG-418N v2 has a successful 10/100MB WAN connection.
Blinking The NBG-418N v2 is sending/receiving data through the WAN.
Off The WAN connection is not ready, or has failed.
WLAN Green On The NBG-418N v2 is ready, but is not sending/receiving data
through the wireless LAN.
Blinking The NBG-418N v2 is sending/receiving data through the wireless
LAN.
The NBG-418N v2 is negotiating a WPS connection with a wireless
client.
Off The wireless LAN is not ready or has failed.
WPS Green On WPS status is configured.
Blinking The NBG-418N v2 is negotiating a WPS connection with a wireless
client.
Off The WPS status is not configured or disabled.