Operation Manual

Chapter 20 Tools
NBG-418N v2 User’s Guide
144
The following table describes the labels in this screen.
Note: Do not turn off the NBG-418N v2 while firmware upload is in progress!
After you see the Firmware Upload In Process screen, wait for several minutes before logging
into the NBG-418N v2 again.
Figure 105 Upload Warning
The NBG-418N v2 automatically restarts in this time causing a temporary network disconnect. In
some operating systems, you may see the following icon on your desktop.
Figure 106 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the Status screen.
If the upload was not successful, the following screen will appear. Click Return to go back to the
Firmware screen.
Table 63 Maintenance > Tools > Firmware
LABEL DESCRIPTION
Choose File Click Choose File button to find the.bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Automatically
reset default
after firmware
upgraded
Click the Automatically reset default after firmware upgraded check box to have the
NBG-418N v2 automatically reset itself after the new firmware is uploaded.
Upload Click Upload to begin the upload process. This process may take up to two minutes.
Check for
Latest
Firmware Now
Click Check for Latest Firmware Now button to have the NBG-418N v2 search for the
latest firmware available online at ZyXEL’s website.