Operation Manual

Chapter 20 Tools
NBG-418N v2 User’s Guide
146
20.4.2 Restore Configuration
Restore configuration allows you to upload a new or previously saved configuration file from your
computer to your NBG-418N v2.
Note: Do not turn off the NBG-418N v2 while configuration file upload is in progress.
After you see a “configuration upload successful” screen, you must then wait one minute before
logging into the NBG-418N v2 again.
Figure 109 Configuration Restore Successful
The NBG-418N v2 automatically restarts in this time causing a temporary network disconnect. In
some operating systems, you may see the following icon on your desktop.
Figure 110 Temporarily Disconnected
If you uploaded the default configuration file you may need to change the IP address of your
computer to be in the same subnet as that of the default NBG-418N v2 IP address (192.168.1.1 in
router mode). See Appendix C on page 175 for details on how to set up your computer’s IP address.
If the upload was not successful, the following screen will appear. Click Return to go back to the
Configuration screen.
Figure 111 Configuration Restore Error
Table 64 Maintenance Restore Configuration
LABEL DESCRIPTION
Choose File Click Choose File button to find the backup file of previous configuration you saved on your
computer using the Backup button.
Upload Click Upload to begin the upload process.