Operation Manual

NBG-418N v2 User’s Guide
148
CHAPTER 21
Sys OP Mode
21.1 Overview
The Sys OP Mode (System Operation Mode) function lets you configure select the device operation
mode: Router, Access Point, or Universal Repeater.
See Chapter 4 on page 28 for more information on which mode to choose.
21.2 General Screen
Use this screen to select how you connect to the Internet.
Figure 113 Maintenance > Sys OP Mode > General
The following table describes the labels in the General screen.
Table 65 Maintenance > Sys Op Mode > General
LABEL DESCRIPTION
System Operation Mode
Router Use Router mode if you want to use routing functions such as LAN DHCP, NAT, firewall
and so on, on the NBG-418N v2 (N). The NBG-418N v2 has separate LAN and WAN
network IP addresses.
Access Point Use Access Point mode if you already have a Router (R) in your network and you want
to bridge all wired and wireless network connections.