Operation Manual

Chapter 3 Connection Wizard
NBG-418N v2 User’s Guide
24
Figure 13 Wizard Step 2: Static IP Connection
The following table describes the labels in this screen
Click Next to configure the WLAN for the NBG-418N v2.
3.3 Connection Wizard: STEP 2: Wireless LAN
Set up your wireless LAN using the following screen.
Table 5 Wizard Step 2: Static IP Connection
LABEL DESCRIPTION
IP Address Select this option if you were given IP address and/or DNS server settings by the
ISP. The fixed IP address should be in the same subnet as your broadband modem
or router.
Subnet Mask Enter the subnet mask address in this field.
Default Gateway Enter the gateway IP address provided by your ISP.
Primary DNS DNS (Domain Name System) is for mapping a domain name to its corresponding
IP address and vice versa. The DNS server is extremely important because
without it, you must know the IP address of a computer before you can access it.
The NBG-418N v2 uses a system DNS server (in the order you specify here) to
resolve domain names for DDNS and the time server. Enter the primary DNS
server’s IP address in this field.
Secondary DNS Enter the secondary DNS server’s IP address in this field. This field is optional.
Back Click Back to return to the previous screen.
Next Click Next to continue.
Exit Click Exit to close the wizard screen without saving.