Operation Manual

Chapter 3 Connection Wizard
NBG-418N v2 User’s Guide
26
Note: The wireless stations and NBG-418N v2 must use the same SSID, channel ID,
WPA-PSK (if WPA-PSK is enabled) or WPA2-PSK (if WPA2-PSK is enabled) for
wireless communication.
3.4 Connection Wizard: STEP 3: Internet Configuration
Click Apply to finish setting up your NBG-418N v2 to operate on your network and access the
Internet.This wizard screen varies according to the connection type that you select.
Figure 15 Wizard Step 3: Internet Configuration.
3.5 Connection Wizard Complete
Click Finish to complete the wizard setup.
Disable Security Click this check box to disable security settings for the WLAN.
WPA2-PSK AES Choose WPA2-PSK AES security to configure a Pre-Shared Key. Choose this option only if
your wireless clients support WPA2-PSK. You will need to enter a Pre-Shared Key in the box
below.
Pre-Shared Key Type in a string of ASCII characters between 8 and 63 or hexadecimal characters between 8
and 64 for the Pre-Shared Key field.
Back Click Back to display the previous screen.
Next Click Next to proceed to the next screen.
Exit Click Exit to close the wizard screen without saving.
Table 6 Wizard Step 2: Wireless LAN (continued)
LABEL DESCRIPTION