Operation Manual

Chapter 4 Modes
NBG-418N v2 User’s Guide
33
The following table describes the labels in this screen.
4.2.1.2 Summary: Packet Statistics
Click the Packet Statistics (Details...) hyperlink in the Status screen. Read-only information
here includes port status, packet specific statistics and the "system up time". The Poll Interval(s)
field is configurable and is used for refreshing the screen.
Figure 23 Summary: Packet Statistics
The following table describes the labels in this screen.
Table 9 Summary: Client Table
LABEL DESCRIPTION
# This is the index number of the host computer.
IP Address This field displays the IPv4 address relative to the # field listed above.
Host Name This field displays the computer host name.
MAC Address This field shows the MAC address of the computer with the name in the Host Name field.
Every Ethernet device has a unique MAC (Media Access Control) address which uniquely
identifies a device. The MAC address is assigned at the factory and consists of six pairs of
hexadecimal characters, for example, 00:A0:C5:00:00:02.
Interface This field shows the NBG-418N v2’s interface to which the client is connected.
IPv6 DHCP Table
# This is the index number of the IPv6 client table.
IPv6 Address This field displays the IPv6 address of the host computer.
Host Name This field displays the computer host name.
Refresh Click Refresh to renew the screen.
Table 10 Summary: Packet Statistics
LABEL DESCRIPTION
Port This is the NBG-418N v2’s port type.
RxPkts This is the number of received packets on this port.
Rx err This is the number of received packets with errors on this port.
Rx drop This is the number of received packets that were dropped on this port.
Txpkts This is the number of transmitted packets on this port.
Tx err This is the number of transmitted packets with errors on this port.
Tx drop This is the number of transmitted packets that were dropped on this port.
System Up Time This is the total time the NBG-418N v2 has been on.