Operation Manual

Chapter 4 Modes
NBG-418N v2 User’s Guide
37
Figure 25 Status Screen (AP Mode)
The following table describes the labels shown in the Status screen.
Table 12 Status Screen (AP Mode)
LABEL DESCRIPTION
Device Information
System Name This is the System Name you enter in the Maintenance > System > General
screen. It is for identification purposes.
Firmware Version This is the current firmware version of the NBG-418N v2.
LAN Information
- MAC Address This shows the LAN Ethernet adapter MAC Address of your device.
- IP Address This shows the LAN port’s IP address.
- IP Subnet Mask This shows the LAN port’s subnet mask.
- DHCP Server This shows the LAN port’s DHCP server status.
WLAN Information
- MAC Address This shows the wireless adapter MAC Address of your device.
- Status This shows the current status of the Wireless LAN - On, Off, or Off by scheduler.
- Name (SSID) This shows a descriptive name used to identify the NBG-418N v2 in the wireless
LAN.
- Channel This shows the channel number which you select manually or the NBG-418N v2
automatically scans and selects.
- Operating Channel This shows the channel number which the NBG-418N v2 is currently using over the
wireless LAN.
- Security Mode This shows the level of wireless security the NBG-418N v2 is using.
- 802.11 Mode This shows the IEEE 802.11 standard that the NBG-418N v2 supports. Wireless
clients must support the same standard in order to be able to connect to the NBG-
418N v2
- WPS This shows the WPS (WiFi Protected Setup) Status. Click the status to display
Network > Wireless LAN > WPS screen.