Operation Manual

Chapter 4 Modes
NBG-418N v2 User’s Guide
38
4.3.2 AP Navigation Panel
Use the menu in the navigation panel to configure NBG-418N v2 features in AP Mode.
The following screen and table show the features you can configure in AP Mode.
Figure 26 Menu: AP Mode
The following table describes the sub-menus.
System Status
Operation Mode This field shows the device operatiing mode: Router, Access Point, Universal
Repeater or Client Bridge.
System Up Time This is the total time the NBG-418N v2 has been on.
Current Date/Time This field displays your NBG-418N v2’s present date and time.
Summary
Client Table Use this screen to view current client information. Click “Details...” to see the
screen.
Packet Statistics Use this screen to view port status and packet specific statistics. Click “Details...” to
see the screen.
Table 12 Status Screen (AP Mode) (continued)
LABEL DESCRIPTION
Table 13 Menu: AP Mode
LINK TAB FUNCTION
Network
Wireless LAN General Use this screen to configure wireless LAN.
MAC Filter Use the MAC filter screen to configure the NBG-418N v2 to block access
to devices or block the devices from accessing the NBG-418N v2.
Advanced This screen allows you to configure advanced wireless settings.
WPS Use this screen to configure WPS.
WPS Station Use this screen to add a wireless station using WPS.
Scheduling Use this screen to schedule the times the Wireless LAN is enabled.
MBSSID Use this screen to configure multiple SSIDs on the NBG-418N v2.
LAN IP Use this screen to configure LAN IP address and subnet mask.
Maintenance
System General Use this screen to view and change administrative settings such as
system and domain names, password and inactivity timer.
Time Setting Use this screen to change your NBG-418N v2’s time and date.