Operation Manual

Chapter 4 Modes
NBG-418N v2 User’s Guide
44
4.5.2 Universal Repeater Navigation Panel
Use the menu in the navigation panel to configure NBG-418N v2 features in Client Bridge Mode.
The following screen and table show the features you can configure in Client Bridge Mode.
Figure 30 Menu: Client Bridge Mode
Firmware Version This is the current firmware version of the NBG-418N v2.
LAN Information
- MAC Address This shows the LAN Ethernet adapter MAC Address of your device.
- IP Address This shows the LAN port’s IP address.
- IP Subnet Mask This shows the LAN port’s subnet mask.
- DHCP Server This shows the status of the LAN port’s DHCP server.
WLAN STA Information
- SSID This is the name of the selected AP that the NBG-418N v2 is associating with.
- Security Mode This shows the wireless security the NBG-418N v2 is using to connect to the
AP.
- Connection Status This shows whether the NBG-418N v2 is currently associated with the selected
AP.
System Status
Operation Mode This field shows the device operating mode: Router, Access Point, Universal
Repeater or Client Bridge.
System Up Time This is the total time the NBG-418N v2 has been on.
Current Date/Time This field displays your NBG-418N v2’s present date and time.
Summary
Client Table Use this screen to view information of the client that is currently connected to
the NBG-418N v2’s Ethernet LAN port.
Packet Statistics Use this screen to view port status and packet specific statistics.
Table 16 Status Screen (Client Bridge Mode) (continued)
LABEL DESCRIPTION