Operation Manual

Chapter 7 WAN
NBG-418N v2 User’s Guide
78
Figure 56 Network > WAN > Internet Connection: Ethernet Encapsulation
The following table describes the labels in this screen.
Table 31 Network > WAN > Internet Connection: Ethernet Encapsulation
LABEL DESCRIPTION
ISP Parameters for Internet Access (Ethernet Static)
Connection Type Choose the Ethernet (Static) option when the WAN port is used as a regular Ethernet.
IP Address Enter your WAN IP address in this field.
IP Subnet
Mask
Enter the IP Subnet Mask in this field.
Gateway IP
Address
Enter a Gateway IP Address (if your ISP gave you one) in this field.
MTU Size Type the MTU or maximum size of each data packet, in bytes, that can move through this
interface. If a larger packet arrives, the NBG-418N v2 divides it into smaller fragments.
Allowed values are 576 to 1500. By default this value is 1500