Operation Manual

Chapter 7 WAN
NBG-418N v2 User’s Guide
85
Figure 61 Network > WAN > IPv6 (Link-local Only)
The following table describes the labels in this screen.
Figure 62 Network > WAN > IPv6 (Static IPv6)
Table 36 Network > WAN > IPv6 (Link-local Only)
LABEL DESCRIPTION
IPv6 Connection
Type
Select Link-local only to allow NBG-418N v2 to communicate with neighboring devices
on the same link. This mode enables IPv6-capable devices to communicate with each
other in the LAN side.
LAN IPv6 Link-Local
Address
This shows the IPv6 Link-local address in the LAN side. This is used by routers when
communicating with neighboring devices on the same link. It allows IPv6-capable
devices to communicate with each other in the LAN side.i
Apply Click Apply to save your changes back to the NBG-418N v2.
Reset Click Reset to begin configuring this screen afresh.