Operation Manual

Chapter 3 ZyXEL NetUSB Share Center Utility
NBG4615 User’s Guide
24
The following table describes the menus in this screen.
Table 4 ZyXEL NetUSB Share Center Utility Main Screen Menus
MENU ITEM DESCRIPTION
System Exit This closes the ZyXEL NetUSB Share Center Utility.
Tools Configuration This opens the ZyXEL NetUSB Share Center Utility
configuration window.
Auto-Connect Printer List This opens the list window that displays all of the
printing devices connected to the NBG4615.
Help About This opens the about window, which provides
information of the utility software and driver versions.
Auto-Connect
Printer
Set Auto-Connect Printer You can set the selected printer to ‘auto-connect’
after you have connected it to your computer during
inital connection. If the printer is auto-connected to
your computer, they will always be connected over
the network. You do not need to configure it manually
each time.
Click this to show your installed printer list and select
the one you want to set as auto-connected.
Note: If the computer is connecting to the shared USB
printer for the first time, you need to click
Connect and setup the printer before you can
use the Auto-Connect Printer function. See
Chapter 14 on page 121 for more details.
Note: You first must install the appropriate drivers for
the printer that you intend to use.
Delete Auto-Connect Printer This removes the auto-connect option from the
selected printer.