Operation Manual

Chapter 8 Easy Mode
NBG4615 User’s Guide
62
Figure 42 Wireless Security: WPS
The following table describes the labels in this screen.
8.7 Status Screen in Easy Mode
In the Network Map screen, click Status to view read-only information about the NBG4615.
Table 27 Wireless Security: WPS
LABEL DESCRIPTION
Wireless Security Click this to go back to the Wireless Security screen.
WPS Create a secure wireless network simply by pressing a button.
The NBG4615 scans for a WPS-enabled device within the range and performs
wireless security information synchronization.
Note: After you click the WPS button on this screen, you have to press a similar
button in the wireless station utility within 2 minutes. To add the second
wireless station, you have to press these buttons on both device and the
wireless station again after the first 2 minutes.
Register Create a secure wireless network simply by entering a wireless client's PIN
(Personal Identification Number) in the NBG4615’s interface and pushing this
button.
Type the same PIN number generated in the wireless station’s utility. Then click
Register to associate to each other and perform the wireless security
information synchronization.
Exit Click Exit to close this screen.