Operation Manual

Chapter 10 Access Point Mode
NBG4615 User’s Guide
76
Figure 50 Status Screen: Access Point Mode
The following table describes the labels shown in the Status screen.
Table 32 Status Screen: Access Point Mode
LABEL DESCRIPTION
Logout Click this at any time to exit the Web Configurator.
Device Information
Host Name This is the System Name you enter in the Maintenance > General screen. It is for
identification purposes.
Firmware Version This is the firmware version and the date created.
Sys OP Mode This is the device mode (Section 7.1.2 on page 51) to which the NBG4615 is set - Access
Point Mode.
LAN Information
- MAC Address This shows the LAN Ethernet adapter MAC Address of your device.
- IP Address This shows the LAN port’s IP address.
- IP Subnet Mask This shows the LAN port’s subnet mask.
- DHCP This shows the LAN port’s DHCP role - Client or None.
WLAN Information
- WLAN OP Mode This is the device mode (Section 7.1.2 on page 51) to which the NBG4615’s wireless LAN is
set - Access Point Mode.
- MAC Address This shows the wireless adapter MAC Address of your device.
- Status This shows the current status of the Wireless LAN - ON or OFF.
- Name (SSID) This shows a descriptive name used to identify the NBG4615 in the wireless LAN.